Introducing the BC-2000 Base Console
|
 |
 |
The most complete high-performance CB
accessory ever
As the perfect companion for CPI's ULTRA
CP2000B Base Station, and the perfect complement to any CB radio, the BC-2000 Base Console
from CPI ranks as the most versatile performance- enhancing accessory available today.
One unit. Six functions.
This impressive list of built-in
capabilities 0f the BC-2000 begins with the exclusive, CPI-developed, 7-digit frequency
counter -the only counter that gives totally accurate readings for both AM and
SSB, and in
both transmit and receive modes when used with CPI radios and certain other makes. Antenna
line sensing gives transmit frequency for all radios.
Then there's the built-in receive
pre-amp, an antenna tuner, a TVI filter, an auxiliary antenna switch and a 6-digit LED
quartz crystal clock.
Save space. Save money, too. It could
take up to six individual acces- sories-and several hundred dollars-to get all the
features the BC-2000 has built into it. And get the greatest performance and enjoyment
possible from your CB radio-whether it's one of ours or one of somebody else's.
The total-performance features of the
BC-2000 include: 7-digit Frequency Counter with: - 3 PPM (.0003%) accuracy - 1 to 40OW
thru-Iine sensitivity - 10 MV high impedance sensitivity - Fast 5 times second update -
Built-in digital offset capability for receive frequency readout for certain radio models
including all CPI units. - Reads in transmit and receive modes and on AM and SSB. No
adapter required.

- Digital Clock with: Highly accurate (3PPM) quartz crystal time
base 12 or 24 hour operation 6-digit LED readout
- Built-in tuned J-FET Receive Pre-amp with: - Low 1.5db noise
figure.
- Automatic in-line transmit bypass switching handles up to 40OW -
IN/OUT switch
- Built-in Antenna Tuner that: - Matches all phase angles to at
least 3:1 VSW.@ - Handles up to 40OW - Has IN/OUT switch with back lighted panel indicator
- Built-in TVI Filter that gives-. - 50db minimum harmonic supp
ression
- Built-in Antenna Switch that: -Allows switching between two
separate antennas - Shows which antenna is in use with front panel LED indicators
- Features: -Tilt stand for dual front mounting levels. -
- All functions operate both base and mobile with quick disconnect
power cables for DC and AC operation. - RF sample output for checking modulation
waveforms.
- Size: 7.75w X 3.50h X 12.Od
Made in USA.
|